Installation and initial configuration of an IP Telephony node Page 313 of 910
IP Line Description, Installation and Maintenance

Summary of installation steps

The following table summarizes the steps for installing each Voice Gateway

Media Card.
Table 59
Installation summary (Part 1 of 2)
Step
ITG-P 24-port
line card Media Card line card
Determine card slot. See “Identify the IPE card
slots on a CS 1000M or
Meridian 1” on page 314
See “Identify the IPE card
slots on a CS 1000M or
Meridian 1” on page 314
Unpack the card. Remove all contents from the
packaging box.
Remove all contents from
the packaging box.
Install the CompactFlash
Card.
Not applicable Procedure 15 on page 318
Install the Voice Gateway
Media Cards.
Procedure 14 on page 316 Procedure 16 on page 324
Install NTCW84JA
ITG-specific I/O Panel Filter
Connector for
Option 51C/61C/81/81C.
Procedure 17 on page 326 Procedure 17 on page 326
Install the NTMF94EA ELAN,
TLAN, RS-232 Serial
Maintenance I/O interface
cable.
Procedure 18 on page 332 Not applicable
Install the A0852632 Shielded
50-pin to Serial/ELAN/TLAN
Adapter.
Not applicable Procedure 19 on page 336