Configuration of IP Telephony nodes using Element Manager Page 415 of 910
IP Line Description, Installation and Maintenance

Upgrade the Voice Gateway Media Card software and

IP Phone firmware

Before beginning, ensure that the following software is installed on the PC:
• Software to extract zipped files (WinZip or equivalent)
• Microsoft Internet Explorer version 6.02 (or later). NetScape Navigator
is not supported.
Upgrade procedure steps
The following steps are required to upgrade the Voice Gateway Media Card
loadware and IP Phone firmware:
1Determine the version of the software currently installed on the Voice
Gateway Media Card. See Procedure 39 on page 420.
2Determine the version of the IP Phone firmware that is currently running
on the Voice Gateway Media Card. See Procedure 40 on page 423.
3Download the most up-to-date version of the software and firmware files
from the Nortel web site. See Appendix F: “Download IP Line 4.5 files
from Nortel web site” on page 903.
4Upload the software and firmware files using the File Upload system
utility in Element Manager. See Procedure 42 on page 426.
5Upgrade the Voice Gateway Media Card software. See Procedure 43 on
page 427.
WARNING
Before beginning the upgrade, ensure that a PWD1 user
name and password has been configured on the Call
Server. If there is no PWD1 user name and password,
configure them in LD 17. This is necessary to enable
login to the Voice Gateway Media Cards and Signaling
Server.