Nortel Networks 1000 IPL> CLI Shell user name and password

IP Line 4.5 administration Page 539 of 910
IP Line Description, Installation and Maintenance
OTM 2.2 stores the community names for Meridian 1 systems. See
Figure 155 on page 486. Procedure 57 on page 486 explains how to change
the SNMP community names to control access to the IP Telephony node.
Element Manager stores the community names for CS 1000 systems. See
Figure 87 on page 378. Procedure 28 on page 378 is used to change the
SNMP community name to control access to the IP Telephony node.
IPL> CLI Shell user name and password
The IPL> Command Line Interface (CLI) is password-protected to control
Telnet access and access to the local maintenance port. The same user name
and password also controls FTP access to the Voice Gateway Media Cards.
Login banner
The IP Line 4.5 login banner information includes the IP Line 4.5 Voice
Gateway Media Card loadware version, ELAN network interface IP address,
card type, firmware version, current time and date, system name, system
location, and system contact.
The following information is an example of the login banner displayed on the
Media Card:
Login:
Password
Welcome to the IP Line command line.
Software Version: IPL-4.50.01
Management IP: 47.11.216.216
Host Type: Media Card
Firmware Version: ITG Firmware Rls 5.7
SysName: ITG Line
SysLocation: TN 10 0
SysContact: designer
OS Time: Date (04/03/2005) Time (09:07:43)
Use “logout” to logout.
Idle session timeout = 20 minutes.
IPL>