Configuration of IP Telephony nodes using Element Manager Page 375 of 910
IP Line Description, Installation and Maintenance
a. Node ID: The node ID entered on the previous page appears.
b. Voice LAN (TLAN) Node IP address: Enter the Voice LAN (TLAN)
Node IP address in dotted decimal format. The Voice LAN Node
IP address is on the TLAN subnet. The Node IP address is the IP
address used by the IP Phones to communicate with the Voice
Gateway Media Cards on the TLAN subnet. If a Voice Gateway
Media Card becomes the primary (Leader) during an election, it
assigns itself the Node IP address.
Note: An asterisk (*) indicates that a field is a required/mandatory field.
c. Management LAN (ELAN) gateway IP address: Enter the
Management LAN (ELAN) subnet gateway IP address in dotted
decimal format. This is the IP address of the gateway of the subnet
to which the Voice Gateway Media Card belongs. Also, this is the IP
address of the router interface on the ELAN subnet, if present. If
there is no Management LAN subnet gateway, enter 0.0.0.0.
d. Management LAN (ELAN) subnet mask: Enter the Management
LAN (ELAN) subnet mask address in dotted decimal format. This is
the subnet mask that is used along with the ELAN subnet IP address
to identify to which subnet the Voice Gateway Media Card belongs.
e. Voice LAN (TLAN) subnet mask: Enter the Voice LAN (TLAN)
subnet mask address in dotted decimal format. This is the subnet
mask that is used along with the TLAN IP address, to identify the
subnet to which the Voice Gateway Media Card belongs.
Note: Do not click Save and Transfer until all the node information has
been entered. If the Submit button is clicked prematurely, the Node
Configuration window reappears. If Save and Transfer was clicked
prematurely, click the Edit button to return to the Node Edit window and
continue the configuration.
End of Procedure