Voice Gateway Media Card maintenance Page 715 of 910
IP Line Description, Installation and Maintenance

File transfer commands

Table 88 lists the file transfer commands.

Table 88
File Transfer commands (Part 1 of 4)
IPL> Commands Description
Signaling
Server
swDownload
“hostname”,
“username”,
“password”,
“directory path”,
“filename”
Loads a new version of software from the FTP host to the
Voice Gateway Media Card.
Updates the software on the Voice Gateway Media Card
with the binary file received from an FTP server
corresponding to the hostname IP address. The Voice
Gateway Media Card FTP client performs a Get which
downloads the file to the flash bank. A checksum is
calculated to verify correct delivery. Once the new software
version is successfully downloaded, the Voice Gateway
Media Card must be rebooted with cardReset to run the
new software.
Note: Hostname refers to the either IP address of the FTP
host, or the Voice Gateway Media Card itself or another
Voice Gateway Media Card when a PC Card in the /A:
drive of the Voice Gateway Media Card contains the
software binary file.
Example:
IPL> swDownload “47.82.32.346”, “anonymous”, “guest”,
“/software”, “VxWorks.mms”
X