Page 534 of 910 IP Line 4.5 administration
553-3001-365 Standard 4.00 August 2005

Private Zone configuration

DSP channels and IP Phones are set as Shared or Private based on zone
configuration. This is accomplished through the parameter
zoneResourceType in the zone configuration commands in LD 117.
The <zoneResourceType> parameter specifies the zone to be either shared or
private.
A zone is configured in LD 117 as follows:
NEW ZONE <zoneNumber> [<intraZoneBandwidth>
<intraZoneStrategy> <interZoneBandwidth> <interZoneStrategy>
<zoneResourceType>]
CHG ZONE <zoneNumber> [<intraZoneBandwidth>
<intraZoneStrategy> <interZoneBandwidth> <interZoneStrategy>
<zoneResourceType>]
By default, a zone is configured as Shared (zoneResourceType=shared).

Virtual Office

The IP Phone Virtual Office feature uses the Station Control Password
(SCPW) feature. The SCPW password can be maintained either through LD
11 administration or by the user if Flexible Feature Code (FFC) code access
is configured. If the SCPW is not configured for a TN registering by means
of the Virtual Office feature, the login is rejected. An appropriate error
message is displayed to alert the user that a password must be configured.
Enable the SCPW in the Customer Data Block (CDB) by configuring the
length of the SCPW (scpl). The SCPW must be at least four digits.
To login using Virtual Office, the TN associated with the current IP Phone
registration must be configured with the CLS VOLA (Virtual Office Login
Allowed). The TN associated with the User ID for the login must be
configured with the CLS VOUA (Virtual Office User Allowed).