Page 502 of 910 Configuration of IP Telephony nodes using OTM 2.2
553-3001-365 Standard 4.00 August 2005
2In the IP Telephony window, select the new IP Telephony node from the
list in the upper part of the window.
All Voice Gateway Media Cards in the node are displayed in the lower part
of the window. See Figure 163.
Figure 163
IP Telephony window
3Press function key F5 to refresh the card status of all cards in the selected
node.
Alternatively, from the upper menu, select View > Refresh > Selection.
The card status changes from “Unknown” or “Not responding” to
“Disabled”, “Enabled”, and “Unequipped”.
Note: If it is not possible to communicate with the Leader 1 and Follower
cards in the node after transmitting the node and card properties and
rebooting the Leader 0 card, this means that the Voice Gateway Media
Cards are unable to communicate back to the remote OTM PC through
the voice gateway or TLAN router.