Appendix C: RM356 Modem Router Page 875 of 910
IP Line Description, Installation and Maintenance
6The local maintenance cable connects directly to Data Terminal
Equipment (DTE).
Note: The analog telephone line must be either a CO line or a PBX
extension with a Direct Inward Dialing (DID) number, whichever complies
with the customer's network security policy.
End of Procedure

Configure the RM356 Modem Router from the

manager menu

This procedure can be performed from a terminal or PC connected to the local
RS-232 manager port on the rear of the Modem Router. Alternatively, the
manager menu can be accessed by Telnet after the IP addressing and routing
have been set up initially from the local manager port.
Use the following keys in the RM356 manager menu:
• the arrow keys to navigate
• the spacebar key to toggle pre-defined configuration values for a field
• the Enter key to save data changes to ROM and exit the current menu
• the Esc key to exit the current menu without saving changes
• enter menu selection number when prompted to display a sub-menu,
configuration form, or command prompts
Follow the steps in Procedure 128 to configure the RM356 Modem Router.
Procedure 128
Configuring the RM356 Modem Router
1Press the Enter key from the terminal or manager menu.
The Enter Password: prompt is displayed for 10 seconds.
2Enter the default RM356 manager password 1234.