Configuration of IP Telephony nodes using OTM 2.2 Page 477 of 910
IP Line Description, Installation and Maintenance
Procedure 54
Configuring SNMP traps and ELAN GW Routing table
1Click the SNMP Traps/Routing and IPs tab in the New Node window.
See Figure 151 on page 477.
IP addresses that are added in this tab create special card routing tables
that direct packets out the ELAN network interface and ELAN gateway.
Exercise caution when adding entries since the entry could result in
one-way voice transmission if a change results in voice packets being
streamed out the ELAN network interface instead of the TLAN network
interface.
Figure 151
New Node – SNMP Traps/Routing and IPs tab