Voice Gateway Media Card maintenance Page 725 of 910
IP Line Description, Installation and Maintenance
nodeTempPwdSet
“tempPwd”, uses, <time>
Configures the temporary IP Phone Installer
Password. This password is disabled by default.
The password must be a string 6 to 14 digits in
length. A null password cannot be entered. The
valid tempPwd characters are 0 – 9 * #.
The uses parameter is a numeric value from
0-1000. This parameter specifies the number of
uses for which the temporary password is valid.
The range for the time parameter is 0 –
240 hours, which is a maximum of 10 days. The
time parameter specifies the duration in hours
that the password is valid.
• If the uses parameter is set to zero, the time
parameter is mandatory. As a result, the
password only expires based on time.
• If the uses parameter is non-zero, the time
parameter is optional.
• If both the uses and time parameters are
entered, the password expires on whichever
comes first, that is, uses is reduced to zero or
the time has expired.
• If both uses and time are entered and both
are set to zero, it is the same as not setting
the temporary password at all.
This command can be entered at any time and
the new parameters overwrite the existing
temporary password’s parameters.
X
nodeTempPwdClear Deletes the temporary IP Phone Installer
Password. It also reset the uses and time
parameters to zero.
X
Table 94
IP Phone Installer Password commands (Part 3 of 3)
IPL> command Description
Signaling
Server