IP Line administration using Element Manager Page 595 of 910
IP Line Description, Installation and Maintenance
10 Click the Save and Transfer button after the card(s) have been added
and configured.
Clicking the Save and Transfer button saves the data to the Call Server.
11 Click OK to confirm.
Note 1: The Save and Transfer button can be clicked after each card is
configured in the Edit window. However, each time the Save and
Transfer button is clicked, the Edit window closes and the Node
Configuration window is displayed. To continue the node configuration,
click the Edit button to return to the Edit window.
Note 2: If the Cancel button is clicked, all information that has been
configured is discarded. The Edit window closes and the Node
Configuration window opens.
The Edit window closes, and the Node Configuration window opens.
12 Click the Transfer/Status button associated with the node where the new
card(s) was added.
13 Click OK to confirm the transfer.
See Figure 192.
Figure 192
Transfer confirmation dialog box
The Transfer Progress window opens and displays each of the Voice
Gateway Media Card in the node.
The Voice Gateway Media Card’s retrieve the CONFIG.INI and
BOOTP.TAB files from the Call Server. A check mark is added to each
field as the card receives its CONFIG.INI and BOOTP.TAB files.
14 When the transfer is complete, click OK in the Progress Check
Complete dialog box.