IP Line administration using OTM 2.2 Page 669 of 910
IP Line Description, Installation and Maintenance
d. Broadcast port: This field is read-only.
Under TLAN:
a. Signaling port: This field is read-only.
b. Voice port: This field displays the range for RTP packets sent to the
IP Phones. In general, use the default value of 5200. If, however,
numerous IP Phones are working over low bandwidth WAN links
using CISCO RTP header compression, then change the voice port
to a number in the range of 16384 to 32767. Coordinate this value
change with the IP network administrator.
14 Click Apply.
15 When all updates to the IP addresses have been made, click OK in the
Node Properties window.
16 Unplug all the Voice Gateway Media Cards, except Leader 0.
Leader 0 receives its configuration from the BOOTP.TAB file.
17 Plug in all the cards.
Leader 0 forces its configuration to all the other cards.