Page 528 of 910 Configuration of IP Telephony nodes using OTM 2.2
553-3001-365 Standard 4.00 August 2005
9If OTM Alarm Notification is running (the red traffic light is showing on the
toolbar), click on the red traffic light to stop alarm notification. The traffic
light changes to green. Click the green traffic light to restart alarm
notification. The traffic light should turn to red to indicate it is running.
If OTM Alarm Notification is not running, as indicated by the green traffic
light, click on the green traffic light to change it to red. This starts Alarm
Notification.
10 Telnet to each Line card and log in. At the IPL> command line, enter
itgAlarmTest.
A series of SNMP traps is emitted by the Voice Gateway Media Card and
appears in the OTM Alarm Notification browser window. Verify that the
device name identifies the correct Voice Gateway Media Card.
For every Voice Gateway Media Card in every node, there is a line in the
table. For example, a line in the table can look like this:
ITG_IP_PHONE 192.9.200.1 MySite_MySystem_Leader_1
The following is a description of each field in the table:
Device Type – a dedicated receive string or name used as an index for
the IP Line application. The Device Type must be ITG_IP_PHONE.
IP Address – the source IP address on the Voice Gateway Media Card
from which the traps are coming (either the card Voice (TLAN) network
interface IP address or card Management (ELAN) network interface IP
address). By default, the SMNP traps are issued from the card Voice
(TLAN) network interface IP address. If a card routing table entry on the
IP Telephony node was previously configured pointing to the IP address
of the OTM, then the SMNP trap issues from the Management (ELAN)
network interface of the card.
Table 72
Format of Devices.txt file
Device Type IP Address Device Name
ITG_IP_PHONE xxx.xxx.xxx.xxx Site_Leader_0
ITG_IP_PHONE xxx.xxx.xxx.xxx Site_Leader_1
ITG_IP_PHONE xxx.xxx.xxx.xxx Site_Follower_2