Page 48 of 910 Description
553-3001-365 Standard 4.00 August 2005
Faceplate components
The components on the faceplate of the Media Card 32-port and 8-port card
are described in the following sections.
Reset button
Use the Reset button on the faceplate to manually reset the Media Card. This
enables the card to be reset without cycling power to it. The Reset button is
used to reboot the card after a software upgrade or to clear a fault condition.
Enable LED
The faceplate red LED indicates the following:
• the enabled/disabled status of the card
• the self-testing result during power up or card insertion into an
operational system
PC Card slot
This slot accepts the Type I or Type II standard PC Flash Cards, including
ATA Flash cards (3 Mb to 170 Mb). The slot is labeled /A:.
Nortel supplies PC Card adaptors that enable CompactFlash cards to be used
in the slot.
WARNING
Do not format the PC Card using a Windows application.
As well, only format the PC Card using the type of card on
which it will be running. For example, a PC Card
formatted using a Small System Controller (SSC) card is
only readable by the SSC card. It is not readable by the
ITG-P 24-port card or the Media Card. A PC Card
formatted using a Voice Gateway Media Card (ITG-P
24-port card or Media Card) is only readable by another
Voice Gateway Media Card. It is not readable by the SSC
card.