Page 492 of 910 Configuration of IP Telephony nodes using OTM 2.2
553-3001-365 Standard 4.00 August 2005
Procedure 59
Configuring access to the File Server
1Click the File Server tab. See Figure 159.
Figure 159
New Node – File Server tab
2Under File Server Parameters, specify the parameters needed to
connect to the file server:
a. File Server IP: Enter the IP address of the file server.
b. Subnet Mask: Enter the subnet mask of the file server.
c. User ID: Enter the user ID that is required to access the file server.
d. Password: Enter the password that is required to access the file
server.
e. Location of the firmware files: Enter the path for the location of the
firmware files. See page 242 for the default location of firmware files
for the system.