Page 544 of 910 IP Line 4.5 administration
553-3001-365 Standard 4.00 August 2005
IP Phone 2004 and IP Phone 2007
When the password is configured, the IP Phone screen shows:
1The four digit Node ID and a Password prompt (see Figure 174 on
page 549), instead of the Node ID and TN fields (see Figure 172 on
page 546).
2When the user enters the password, an asterisk (*) is displayed for each
digit entered. The password is not shown.
3Once the Node ID and Password are entered, the user presses OK. If the
password passes the Connect Server’s authentication, a screen is
displayed with the TN field (see Figure 174 on page 549).
IP Phone 2001, IP Phone 2002, and IP Audio Conference Phone
2033
When the password is configured, the IP Phone screen shows:
1The four digit Node ID screen is displayed first (see Figure 175 on
page 550).
2The user is then prompted with the Password screen (see Figure 175 on
page 550) instead of the TN field screen (see Figure 173 on page 547).
3When the user enters the password, an asterisk (*) is displayed for each
digit entered. The password is not shown.
4Once the Password is entered, the user presses OK. If the password
passes the Connect Server’s authentication, a screen is displayed with the
TN field (see Figure 175 on page 550).
If the Node ID and Password are not entered, the registration continues after
five seconds and the TN is not displayed.
If an invalid Node ID password is entered, the Node ID and Password screen
is displayed again. This screen is re-displayed a maximum of two times,
giving the technician a total of three chances to enter the password. After
three failed attempts, the registration continues as if there were no password
entries. Reboot the IP Phone and try again if more tries are needed.