Features Page 107 of 910
IP Line Description, Installation and Maintenance
state by ‘-’ (dash). The ACF status is any value described in the LD 80 output.
The Call Server ACF timer value is not provided in the output.
See Figure 10.
Figure 10
isetShow command output with ACF example

DSP peg counter for CS 1000E systems

The conversion of TDM voice to IP packets is performed by DSP resources
residing on a Voice Gateway Media Card in the IP Media Gateway (IPMG)
of a CS 1000E system. The Voice Gateway Media Cards have a limited
number of DSP resources that actually perform the conversion. When all DSP
resources are busy, calls are blocked.
The DSP Peg Counter feature provides three counters. The first peg counter
provides a count of the number of attempts to allocate a DSP resource on an
IPMG. The second provides a count of the number of times calls were
blocked on an IPMG due to a lack of DSP resources. If the call failed due to
a lack of bandwidth, this is reflected in the third peg counter. The counters are
a part of customer traffic measurement in LD 2.
For more information, refer to Traffic Measurement: Formats and Output
(553-3001-450) and Software Input/Output: Administration (553-3001-311).