Appendix C: RM356 Modem Router Page 881 of 910
IP Line Description, Installation and Maintenance
23 Under IP Address Supplied By, toggle Dial-in User= No and
IP Pool = Yes.
24 For IP Start Addr =, type in the ELAN IP address that will be assigned to
the Dial-up Networking (DUN) PPP client on the remote OTM 2.2 PC.
Note: The remote OTM PC receives this ELAN IP address when DUN
makes a dial-in PPP connection to the Modem Router. As long as DUN
remains connected to the Modem Router, IP applications on the remote
OTM PC function as if the PC were located on the customer's ELAN.
25 Under Session Options, configure Input Filter Sets = and Output Filter
Sets = according to the customer's IP network security policy and
practices.
The default setting; however, is no Filter Sets.
26 Set Idle Timeout = 1200.
1200 seconds provides 20 minutes idle timeout disconnect for remote
support purposes.
27 Press Enter to confirm and save data to ROM and then press Esc to
return from the sub-menu to the main menu.
28 Enter menu selection number 14, under the Advanced Applications
section.
The Menu 14 - Dial-in User Setup is displayed.
Menu 14 - Dial-in User Setup
1. itgadmin
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter Menu Selection Number:
Note: Up to eight dial-in user profiles can be defined according to the
customer's network security policy.
29 Enter menu selection 1 to edit the first dial-in user profile.