Configuration of IP Telephony nodes using Element Manager Page 379 of 910
IP Line Description, Installation and Maintenance
2Obtain the following information from the system administrator and enter
it in the appropriate fields:
• Navigation Site Name (NAV_SITE)
• Navigation System Name (NAV_SYSTEM)
• Contact person for this machine (SNMP_SYSCONTACT)
• Name assigned to this machine by the administrator
(SNMP_SYSNAME)
• System Management Read community string
(SYSMGMT_RD_COMM)
• System Management Write community string
(SYSMGMT_WR_COMM)
• Admin Group community string (ADMIN_COMM).
Select 1, 2, or 3 from the drop-down list.
• SNMP trap destination address (OPEN_ALARM)
3Click Submit to save the configuration or Cancel to cancel the entry.
Note: Click Refresh to retrieve the current information from the system.
End of Procedure
Synchronization of community name strings
After the system community name strings are configured, it is necessary to
perform a data dump to synchronize these community name strings from the
Call Server to the Signaling Server and Voice Gateway Media Cards. As well,
when a link is established between the Signaling Server or Voice Gateway
Media Cards and the Call Server, the Call Server transmits the community
name strings to those devices.

Configure Voice Gateway Profile data

Follow the steps in Procedure 29 on page 380 to configure the Voice Gateway
Profile data.