Personal Directory, Callers List, and Redial List Page 261 of 910
IP Line Description, Installation and Maintenance

Configure the IP Phone Application Server and remote

backup

Note: If the IP Phone Application Server must support more than 1000
users, refer to “Configure IP Phone Application Server on a separate
Signaling Server” on page 264.
The IP Phone Application Server and remote backup configuration are
configured in Element Manager by clicking (in the navigator) IP Telephony
> Personal Directories > Server.
Since a backup and restore of the IP Phone Application Server’s database can
be performed, it is necessary to configure information to support the
backup/restore functionality.
The following parameters are configured (see Figure 44 on page 262):
• ELAN network interface IP address of the IP Phone Application Server
where the database is located
• checkbox to turn on/off the remote backup functionality
• IP address of the server where the backup is saved
• path, filename, user ID, and password to support the backup/restore
functionality