Voice Gateway Media Card maintenance Page 745 of 910
IP Line Description, Installation and Maintenance
plis Gives detailed patch status information for a loaded patch.
Syntax:
plis “[handle]”
If the pout command is issued without a parameter, enter a handle when
prompted.
pnew Creates memory patches for the Voice Gateway Media Card.
• The release of the patch is assumed to be the same as that of the current
load.
• The address to be patched is checked to ensure that it is in range.
• For each address that is changed, the “old” contents are assumed to be the
current contents of that memory address.
• If a path is not provided for the new path filename then it is assumed that the
patch is in the /C:/u/patch directory.
Once a memory patch is created using the pnew command, it is loaded and
activated like any other patch.
Syntax:
pnew
Note: The pnew command has no parameter(s).
Table 101
Patch commands (Part 3 of 3)
Command Description