Page 764 of 910 Voice Gateway Media Card maintenance
553-3001-365 Standard 4.00 August 2005
2Depending on the location of the firmware file, enter one of the following
commands as shown in Table 107:
The firmware file name for the ITG-P 24-port line card is ITGPFW57.BIN.
The firmware file name for the NTVQ01AA/BA Media Card is
SMCFW68.BIN, The firmware file name for the NTVQ01AB/BB Media
Card is SMCFW82.BIN.
If the upgrade process is successful, the following is displayed:
Upgrade packet: 0..100..200..300..400..500..600..700..800..
tUpgradeXa: 8051XA Upgrade completed OK
tUpgradeXa: Reboot the pack to run new loadware
Note: If these messages do not display, the upgrade was not successful.
Repeat step 2 again. Do not continue with steps 4 and 5.
3Reboot the card if both of the following are true:
• the download is successful
• the software version on the card that was checked in Step 1 is
version 4.5 or later
Table 107
Upgrade command based on file location
— File is located on the card's /C: drive (The file was previously FTP’d to /C:):
upgradeXa “127.0.0.1","userid”,"password”,"</C:/path>”,"<fw_filename>”
— File is located on a PC Card plugged in the card’s faceplate:
upgradeXa “127.0.0.1”,"userid”,"password”,"</A:/path>”,"<fw_filename>”
— File is located on another card’s /C: drive (The file was previously FTPed to /C:):
upgradeXa “<ITG ELAN IPaddr>”,"userid”,"password”,"<path>”,"<fwfilename>”
— File is located on the OTM PC:
upgradeXa “<PC’s IP addr>”,"itguser”,"itguser”,"“,”<fw_filename>”
— File is located on a network FTP server:
upgradeXa "<server’s IP addr>","<uid>","<pswd>","<path>","<fw_filename>"