IP Line administration using OTM 2.2 Page 677 of 910
IP Line Description, Installation and Maintenance
Figure 229
ITG Node Properties – DSP Profile tab - Codec Options sub-tab with G.729 AB codec selected
Note: If there are multiple nodes on a system and the same codec is
selected on more than one node, ensure that each node has the same
voice payload size configured for the codec.
End of Procedure
As a result of the Run-time Configuration Change feature, the card does not
have to be restarted if there are changes to the settings on the DSP Profile tab.
For changes to the Codec Options, disable the card, download the card
properties, and then re-enable the card.
If the settings have changed on the DSP Profile tab, follow the steps in
Procedure 100 to disable and then enable the Voice Gateway Media Card.
CAUTION
This procedure is not supported for a node that resides
on a CS 1000 system.