Convert IP Trunk Cards to Voice Gateway Media Cards Page 837 of 910
IP Line Description, Installation and Maintenance
Figure 269
Software window for ITG-P 24-port cards
10 Click ITG-Pentium Release 5.7 Firmware.
11 Save the file to the desired location.
12 Click ITG-Pentium Rel 5.7 F/W Upgrade & Instruction.
13 Save the file to the desired location.
14 Unzip the document file.
15 Follow the procedures in the “ITG-Pentium Rel. 5.7 Firmware Upgrade
and Instruction” document to upgrade the firmware and reboot the ITG-P
card.
Note: Disable the IP Trunk cards, gracefully one by one. Upgrade the
firmware, reboot and then enable each card before performing the
firmware upgrade on the next card.
End of Procedure

Add the converted cards to an IP Telephony node

Before adding the converted cards to an IP Telephony node, ensure the
following:
• the Signaling Server is functioning properly
• the ELAN and TLAN network interfaces are properly configured