Features Page 217 of 910
IP Line Description, Installation and Maintenance
ECNT FW <XX>
<A> <BB> <FF>
Prints the number of IP Phones with specified firmware ID and running
specified firmware version.
<XX> – firmware ID
<A> – major version designator
<BB> – minor version designator
<FF> – filter to apply on firmware version; can be one of the following:
= – equal to
~ – not equal to
< – less then
> – greater then
Only the XX parameter is mandatory.
ECNT FW <XX> <A> <BB> defaults to
ECNT FW <XX> <A> <BB> =
ECNT FW <XX> <A> counts all registered IP Phones with firmware ID
equal to <XX> and major version designator equal to <A>.
ECNT FW <XX> counts all registered IP Phones with firmware ID equal
to <XX>.
ECNT FW is equivalent to ECNT FW ALL; that is, the list containing
firmware IDs and the quantity of IP Phones with this firmware ID is
printed.
ECNT MODL
<MMMM>
Prints the number of IP Phones of specified model.
<MMMM> – specifies model name.
If this parameter is omitted, then a list of the model names and
associated mnemonics is printed.
Table 37
LD 117 commands to count registered IP Phones (Part 3 of 4)
Command Description