Page 620 of 910 IP Line administration using Element Manager
553-3001-365 Standard 4.00 August 2005
3Reboot the Leader using the cardReset command.
The Leader card reads the new IP address from NVRAM.
4Restart all the other cards.
End of Procedure

Update other node properties

Some basic Voice Gateway Media Card configuration must be performed
from the IP Telephony Node Edit window.
To update the node properties in the following sections:
• DSP Profile section – follow the steps in Procedure 29 on page 380
• QoS section – follow the steps in Procedure 30 on page 385

Telnet to a Voice Gateway Media Card using

Virtual Terminal

To access the CLI on a Voice Gateway Media Card using Virtual Terminal
from Element Manager, follow the steps in Procedure 84.
Procedure 84
Accessing a Voice Gateway Media Card using Telnet
1In the Element Manager navigator, click IP Telephony > Nodes:
Servers, Media Cards > Maintenance and Reports.
The Node Maintenance and Reports window opens.
2Expand the node containing the Voice Gateway Media Card.
3Click the Virtual Terminal button associated with the Voice Gateway
Media Card.
See Figure 206 on page 621.