Page 838 of 910 Convert IP Trunk Cards to Voice Gateway Media Cards
553-3001-365 Standard 4.00 August 2005
• the Signaling Server is configured as the Leader in the node
• the Call Server software is upgraded to CS 1000 Release 4.5 software
• all unused IP Trunk TNs have been removed from the Call Server
database
• all IP Trunk cards have been converted to Voice Gateway Media Cards
(upgraded to the IP Line 4.5 application)
• a PC is connected to the LAN
Choose one of the following methods:
1“Manually add converted Voice Gateway Media Cards to the existing
IP Telephony node” on page 838.
2“Import all converted Voice Gateway Media Cards into a new
IP Telephony node” on page 843. Use this method if the entire IP Trunk
node has been converted and the converted Voice Gateway Media Cards
do not have to be added to a larger existing node.

Manually add converted Voice Gateway Media Cards to the

existing IP Telephony node

Follow the steps in Procedure 122 to add the converted Voice Gateway Media
Cards to an existing IP Telephony node using Element Manager.
Procedure 122
Adding the converted Voice Gateway Media Cards into an existing
IP Telephony node
1Log in to Element Manager from the web browser by entering the IP
address of the Signaling Server.
2Enter the User ID and password (usually the same as the Call Server
User ID and password).
3In the Element Manager navigator, click IP Telephony > Nodes:
Servers, Media Cards > Configuration.
The Node Configuration window opens.
4Click the Edit button of the node to which the converted cards will be
added as Followers.