Page 566 of 910 IP Line 4.5 administration
553-3001-365 Standard 4.00 August 2005
When all cards configured in a node are registered, the last part of the output
displays the following:
====== All cards in node configuration are
registered ======
tpsShow
The following is an example of the output from the tpsShow command for an
ITG-P 24-port line card.
IPL> tpsShow
Node ID : 0
Is master : 1
Up time : 4 days, 2 hours, 40 mins, 53 secs (355253
secs)
TN : 03-00
Platform : ITG Pentium
TPS Service : Yes
IP TLAN : 192.168.1.140
IP ELAN : 192.168.1.14
ELAN Link : Up
Sets Connected: 4
Sets Reserved : 0
value = 18 = 0x12

Packet loss monitor

Monitor audio packet loss using the following commands:
•vgwPLLog 0|1|2 – enables the packet loss monitor. Packet loss is
measured in the receive direction and the two halves of a call are
monitored and logged independently.
— A value of zero (0) disables packet loss logging.
— A value of one (1 – default) logs a message if packet loss during the
course of the call exceeds the threshold set with the itgPLThreshold
command.