Page 352 of 910 Installation and initial configuration of an IP Telephony node
553-3001-365 Standard 4.00 August 2005
TN l s c u
c u
Format for Large System and CS 1000E system, where
l = loop, s = shelf, c = card, u = unit.
Enter loop (virtual loop), shelf, card, and unit (terminal
number),
where unit = 0 – 31
Format for Small System, CS 1000S system, Media
Gateway 1000B, and Media Gateway 1000T, where c =
card and u = unit.
Enter card slot (virtual slot) and unit.
Note: See Table 67 on page 349 for virtual superloop to
virtual card slot mapping for Small Systems.
DES a...z ODAS telephone designator
CUST xx Customer number as defined in LD 15
ZONE 0 – 255 Zone number to which this IP Phone belongs. The zone
prompt is applied only when TYPE = i2001, i2002, i2004,
or i2050.
Note: Verify that the zone number exists in LD 117.
Table 69
LD 11 – Configure an IP Phone (Part 2 of 3)
Prompt Response Description