Configuration of IP Telephony nodes using Element Manager Page 437 of 910
IP Line Description, Installation and Maintenance
Figure 127
Command Parameters
5Click Submit.
6Repeat Steps 3 – 5 for each Voice Gateway Media Card to be re-enabled.
End of Procedure

Upgrade the IP Phone firmware

When the IP Line 4.5 loadware has been upgraded on the Voice Gateway
Media Cards, determine if an IP Phone firmware upgrade is also required. If
an upgrade is required, the Voice Gateway Media Cards must be upgraded to
the newest IP Phone firmware version. To upgrade the firmware required for
the IP Phones, follow the steps in Procedure 46 on page 438. This procedure
has two major components:
• loading the IP Phone firmware onto each Voice Gateway Media Card in
the node
• propagating the firmware from the Voice Gateway Media Card to each
IP Phone registered on that card