Page 410 of 910 Configuration of IP Telephony nodes using Element Manager
553-3001-365 Standard 4.00 August 2005
The Node Maintenance and Reports window opens. See
Figure 107.
Figure 107
Node Maintenance and Reports window
b. Expand the node by clicking the plus sign (+) to the left of the
associated node.
c. Click the Reset button for the Leader card.
Note 1: If any of the Signaling Server IP address information is changed,
the Signaling Server must be rebooted.
Note 2: Alternatively, restart the card by entering the cardReset
command at the IPL> prompt or by pushing the Reset button on the card’s
faceplate.
End of Procedure
WARNING
Do not use a pencil to reset the Voice Gateway Media
Card. The graphite carbon can create an electrical short
circuit on the board.