Page 556 of 910 IP Line 4.5 administration
553-3001-365 Standard 4.00 August 2005
The nodePwdEnable and nodePwdDisable commands enable and
disable the administrative IP Phone Installer Password, respectively.
End of Procedure
Temporary IP Phone Installer Password
A temporary IP Phone Installer Password can be configured. This enables
temporary user access to the TN for configuration. A temporary password
removes the need to distribute the administrative (node) password and then
the need to change it afterwards. If there is a null administrator password
configured and a temporary password is created, the temporary password
overrides the null administrative password.
The syntax for temporary IP Phone Installer Password specifies:
• the password
• the number of times that the password can be entered
• the time that the password is valid
To configure a temporary IP Phone Installer Password, follow the steps in
Procedure 70.
Procedure 70
Configuring the temporary IP Phone Installer Password
1Type nodeTempPwdSet <“password”>, <uses>, <time> at the IPL>
prompt, where “password” is the temporary password string 6 to 14 digits
in length, uses is the value from 0 to 1000, and time is between 0 and 240
hours.
For example, nodeTempPwdSet “987654”, 15, 3
2Type nodePwdShow to see the following:
NodeID
======
123
PwdEna
=======
Ye s
Pwd
========
1234567
TmpPwd
========
987654
Uses
=======
15
Timeout
===========
0d 3h 0m 0s