Page 532 of 910 IP Line 4.5 administration
553-3001-365 Standard 4.00 August 2005
Reset the Operational Measurements file . . . . . . . . . . . . . . . . . . . . . . . 569
Introduction
This chapter explains how to administer IP Line 4.5 and the Voice Gateway
Media Cards on the Meridian 1 and CS 1000 systems.
Administration procedures include activities such as monitoring the system
status, operational reports, performing upgrades, changing configuration, and
adding, changing, and removing cards. Administration does not include
engineering, provisioning, initial installation and configuration, maintenance,
or troubleshooting.
The Voice Gateway Media Card provides four administration interfaces:
• Optivity Telephony Manager (OTM) 2.2
OTM’s IP Line 4.5 application provides a GUI to the Voice Gateway
Media Card. OTM 2.2 is used to Telnet to the card, install and upgrade
software and firmware, configure alarm event reporting, view and update
a card’s property and configuration data, add new cards to a node,
schedule reports and other related tasks.
• Element Manager
Element Manager is a web server that provides a GUI using the Internet
Explorer 6.0.2600 (or later) web browser. Element Manager is used to
Telnet to the card, install and upgrade software and firmware, configure
alarm event reporting, view and update card property and configuration
data, add new cards to a node, schedule reports, and other related tasks.
• IPL> Command Line Interface (CLI)
Use the CLI to display card and node status, change passwords, check
software versions, view channel states, and other card information. The
CLI is also used for expert level support and debug. The prompt for the
CLI on the Voice Gateway Media Card is IPL>. Access the CLI through
a direct serial connection to the I/O panel serial port, the Maint Port on