Voice Gateway Media Card maintenance Page 723 of 910
IP Line Description, Installation and Maintenance

IP Phone Installer Password commands

Table 94 lists the IP Phone Installer Password commands.

Table 94
IP Phone Installer Password commands (Part 1 of 3)
IPL> command Description
Signaling
Server
nodePwdSet “password” Sets and enables the administrative IP Phone
Installer (node) Password. This is also known as
the node level IP Phone Installer Password.
If a null password (0 characters in length) is
configured, all IP Phones that attempt to register
after this command has been issued display a
prompt for node password before the TN can be
modified.
The “password” parameter must be null or 6 to
14 digits in length; The valid characters are 0 – 9
* #.
The null password causes the Node ID and
Password screen on the IP Phone to be skipped
during restart. This command can be entered at
any time; the new password entered overwrites
the prior password.
X
nodePwdShow Displays the settings of the IP Phone Installer
Password. The command displays the current
password, the state of password entry
(enable/disable), the temporary password, and
the number of uses and time to expiry.
X
nodePwdEnable Enables the administrative IP Phone Installer
Password setting. After this command is
entered, all IP Phones registering display the
password screen.
X