Page 432 of 910 Configuration of IP Telephony nodes using Element Manager
553-3001-365 Standard 4.00 August 2005

Reboot the Voice Gateway Media Card

Follow the steps in Procedure 44 to reboot a Voice Gateway Media Card.

Procedure 44
Rebooting the Voice Gateway Media Card
1Disable the Voice Gateway Media Card.
2Click the Element Manager navigator, click IP Telephony > Nodes:
Servers, Media Cards > Maintenance and Reports.
The Node Maintenance and Reports window opens.
3To expand the node containing the card to be rebooted, click the plus sign
(+) to the left of the node.
4Click the Voice Gateway Media Card’s associated Reset button to reboot
the card.
Note 1: The cards remain in the “Disabled” state after the upgrade, so a
“Reset” command can be used. The cards can also be reset by using a
pointed object to press the Reset button on the card’s faceplate.
Note 2: Reboot the Leader card only if the node is using the Voice
Gateway Media Card as the Leader; that is, the Signaling Server is not
the Leader.
5Click the card’s Status button in the Node Maintenance and Reports
window to verify the status of the Voice Gateway Media Card.
In the example shown in Figure 123 on page 433, the Media Card’s status
is displayed, showing that it is enabled.