Installation and initial configuration of an IP Telephony node Page 357 of 910
IP Line Description, Installation and Maintenance
KEMOFST <KEM>
<KeyOffset>
Automatically calculates the IP Phone KEM key based
on the entered values. This prompt enables the system
administrator to enter a KEM number of 1 or 2 and a Key
Offset number from 0-23. Once entered, the KEY
prompt is prompted with the appropriate KEY value filled
in.
Enter <CR> to terminate data entry.
When values are entered for KEM and KeyOffset, the
KEY xx prompt displays, followed by KEMOFST prompt.
This loop continues until no values (<CR> only) are
entered at the KEMOFST prompt.
Note 1: Applies to an IP Phone 2002 if <CR> was
entered at the KEY prompt.
Note 2: Applies to an IP Phone 2004 with
KEM = 2, and where <CR> was entered at the KEY
prompt.
KEY xx Edit the IP Phone KEM key number specified by
KEMOFST, where:
xx = the number of the key (for example, KEY 36)
Enter <CR> to keep the current setting.

LD 11 – Configure the IP Phone KEM. (Part 4 of 4)

Prompt Response Description