IP Line administration using Element Manager Page 619 of 910
IP Line Description, Installation and Maintenance
Figure 205
Card Reset dialog box
End of Procedure

Restart all the Voice Gateway Media Cards

All the Voice Gateway Media Cards must be restarted if there has been a
change to the following:
• node IP address
• subnet of either the TLAN or ELAN (by changing the subnet mask or the
subnet fields of the IP address)
These changes affect the whole node. As a result, all the cards must be
restarted.
If the Management (ELAN) network interface IP address of the Leader has
changed, all the cards must be restarted. Even though this is a change to a
single card, this change affects all cards, as this IP address is used to transmit
properties to the node.
Follow the steps in Procedure 83 to restart all the Voice Gateway Media
Cards.
Procedure 83
Restarting all Voice Gateway Media Cards
1Telnet to the card.
2Use the setLeader command to configure the new IP address.
The Leader uses this new IP address when it reboots.