Page 214 of 910 Features
553-3001-365 Standard 4.00 August 2005

Call Statistics collection

IP Line 4.5 enables statistics on the Quality of Service (QoS) of calls
connected by the Call Server to be collected.
These commands print the number of IP Phones registered on a card, zone,
node, or Signaling Server. Traffic printouts are available per zone at
user-configurable intervals for the following:
• blocked calls
• bandwidth used
• call attempts and completions

Counting IP Phones

The commands to count registered IP Phones are available in LD 32 and
LD 117.
CS 1000 Release 4.5 introduces the following commands in LD 117:
• ECNT FW <XX> <A> <BB> <FF> – count the number of IP Phones
with specified firmware ID and, optionally, firmware version.
• ECNT MODL <MMMM> – count the number of IP Phones of the
specified model>. If the MMMM parameter is omitted, the IP Phone
Model Names and their associated mnemonics are listed.
• ECNT PEC <PEC> – count the number of IP Phones with a specified
Product Engineering Code (PEC).
Before CS 1000 Release 4.5, all ECNT commands were in LD 32. The
following existing LD 32 ECNT commands are now duplicated in LD 117 to
maintain a consistent interface. However, they continue to be maintained in
LD 32 as well.
• ECNT CARD <Loop> <Shelf> <Card> <CustomerNumber>
• ECNT NODE <NodeNumber>
• ECNT SS <HostName>
• ECNT ZONE <ZoneNumber> <CustomerNumber>