Voice Gateway Media Card maintenance Page 719 of 910
IP Line Description, Installation and Maintenance

IP configuration commands

Table 89 lists the IP configuration IPL> commands.

Table 89
IP Configuration commands
IPL> Command Description Signaling
Server
NVRIPSet Configures the IP address in NVRAM.
NVRGWSet Configures the default gateway address in NVRAM.
NVRSMSet Configures the subnet mask in NVRAM.
NVRIPShow Prints the values of the IP parameters that reside in
NVRAM.
NVRClear Clear IP parameters in NVRAM.
nvramLeaderSet Configures the Leader bit in NVRAM.
nvramLeaderClr Clears the Leader bit in NVRAM, but does not erase
the IP parameters in NVRAM.
setLeader Configures a Leader card, including the IP address,
gateway, subnet mask, boot method to static, and
Leader bit in NVRAM. This one command does all the
necessary actions to make a Leader.
clearLeader Clears the Leader information in NVRAM, sets the boot
method to use BOOTP, and removes the old
configuration files. This command makes a Leader
card into a Follower card.
tLanDuplexSet Configures the TLAN Ethernet duplex mode.
tLanSpeedSet Configures the TLAN Ethernet speed.