Page 218 of 910 Features
553-3001-365 Standard 4.00 August 2005
Error messages for the ECNT commands
Error messages are printed when invalid data is entered for these commands.
The messages include valuable information such as the correct ranges for the
command parameters. See the following tables for the error messages:
• Table 38: “ECNT Card command error messages” on page 218.
• Table 39: “ECNT Zone command error messages” on page 219.
• Table 40: “ECNT Node command error messages” on page 219.
• Table 41: “ECNT SS command error message” on page 220.
ECNT PEC <PEC> Prints the number of IP Phones with specified PEC, where:
<PEC> – Product Engineering Code
ECNT PEC is equivalent to ECNT PEC ALL; that is, the list containing
the PECs and the quantity of IP Phones with this PEC is printed.
Table 38
ECNT Card command error messages (Part 1 of 2)
Error Error Message
Slot out of range error Slot out of range. Range: [61-99]
Slot non-virtual loop error Slot does not correspond to a virtual
loop.
Slot not configured loop error Slot corresponds to a virtual loop but it is
not configured.
Customer out of range error Customer out of range. Range: [0-31]
Table 37
LD 117 commands to count registered IP Phones (Part 4 of 4)
Command Description