Page 700 of 910 Voice Gateway Media Card maintenance
553-3001-365 Standard 4.00 August 2005
Table 84
LD 32 – Maintenance commands for the Voice Gateway Media Card (Part 1 of 4)
Command Description
DISC l s c Disable the specified card,
where: l = loop, s = shelf, c = card.
Note 1: Disable the Voice Gateway Media Card before transmitting card
properties from the OTM IP Line 4.5 application.
Note 2: The card reset button is available only in the OTM IP Line 4.5
application when the card is disabled.
Note 3: When the Voice Gateway Media Card is disabled in LD 32, it
does not disable the active Leader or backup Leader functions.
DISI l s c Disable the specified card when idle,
where: l = loop, s = shelf, c = card
Note 1: This temporarily prevents the IP Telephony node from seizing
the port from incoming calls.
Note 2: Use the DISI command to disable the Voice Gateway Media
Card instead of the DISC command. The disabled state of the Voice
Gateway Media Card is indicated by the NPR0011 message.
DISU l s c u Disable the specified unit,
where: l = loop, s = shelf, c = card, u = unit