Voice Gateway Media Card maintenance Page 729 of 910
IP Line Description, Installation and Maintenance
The PRT DNIP command accepts a partially defined DN; that is, a DN
entered with only partial leading digits. For example, entering a DN of 34
with no customer number results in output for any DN in the system starting
with 34.
PRT DNIP output
The PRT DNIP command generally produces the following output:
• an initial line displaying the DN and customer number. If there is output
for multiple customers, this line is repeated before each customer’s
output.
• information for each occurrence of the DN on any IP Phone for that
customer.
—TN
— set type
— key number of DN appearance and type of DN
— current IP address of the IP Phone
— configured zone for the IP Phone
— state of the IP Phone’s registration
If the IP Phone is behind a NAT device, the public IP address is displayed,
with the private IP address underneath in parenthesis.
An example of PRT DNIP output is shown in Figure 236 on page 730.