Page 738 of 910 Voice Gateway Media Card maintenance
553-3001-365 Standard 4.00 August 2005
enaVGW Enables the Voice Gateway.
All gateway channels register with the Call Server. This command is
applicable only to the Voice Gateway Media Card or the stand-alone
IP Line application.
enaAll Enables both the LTPS service and the Voice Gateway channels.
This command is a combination of both enaTPS and enaVGW
commands.
On the Signaling Server, this command affects only the LTPS. It
does not affect the virtual trunks or gatekeeper components.
disableServices Causes the Voice Gateway Media Card or Signaling Server to
gracefully switch the registered resources to the other Voice
Gateway Media Cards or Signaling Servers located in the same
node. This command does not interrupt established calls.
forceDisableServices Forces all registered resources on the Voice Gateway Media Card
or Signaling Server to reregister with the other Voice Gateway
Media Cards or Signaling Servers in the node. This command
interrupts established calls.
enableServices Enables all the Voice Gateway Media Cards or Signaling Servers to
accept registrations of resources.
levelRegistations Causes the Voice Gateway Media Card or Signaling Server to
attempt to balance the registration load between this card/server
and the rest of the node components.
Table 98
Graceful TPS commands (Part 2 of 2)
Command Description