Features Page 227 of 910
IP Line Description, Installation and Maintenance
Zone. If more DSP resources are required by these IP Phones than what are
available in the zone, DSPs from other Shared Zones are used.
IP Phones configured in Shared Zones cannot use the Private Zones’
channels.
Select the gateway channels in the following order:
• Select a channel from the same Private Zone as the zone where the IP
Phone is configured.
• Select any available channel from the pool of Shared Zones’ channels.

LD 117

VGW channels and IP Phones are set as shared or private based on zone
configuration. In LD 117, zone configuration can be set to either shared or
private using the parameter <zoneResourceType>.
A zone is configured in LD 117 as follows:
NEW ZONE <zoneNumber> [<intraZoneBandwidth>
<intraZoneStrategy> <interZoneBandwidth> <interZoneStrategy>
<zoneResourceType>]
CHG ZONE <zoneNumber> [<intraZoneBandwidth>
<intraZoneStrategy> <interZoneBandwidth> <interZoneStrategy>
<zoneResourceType>]
By default, a zone is configured as shared (zoneResourceType=shared).
Example
The command to add a new zone, in this example zone 10, is as follows:
new zone 4 BQ 10000 BQ 10000 private
Zone 4 added. Total number of Zones = n
(where n is the total number of zones)