Page 702 of 910 Voice Gateway Media Card maintenance
553-3001-365 Standard 4.00 August 2005
ECNT NODE
nodeNum
Counts and prints the number of IP Phones registered for the specified
node.
• If the nodeNum parameter is not entered, the count is printed for all
nodes.
Example:
ECNT NODE 8765
<< Zone 8765 >>
Number of Registered Ethersets: 3
ECNT SS
<hostName>
Counts and prints the number of IP Phones registered for the specified
Signaling Server.
• If hostName parameter is not entered, the count is printed for all
Signaling Servers.
Example:
ECNT SS
<< Signaling Server: BVWAlphaFox IP 10.10.10.242>>
Number of Register Ethersets: 1000
Note: If the hostName variable contains an underscore (_), then an
NPR001 error message is returned, as an underscore is considered to be
an invalid character.
ENLC l s c Enable the specified card,
where: l = loop, s = shelf, c = card
ENLU l s c u Enable the specified unit,
where: l = loop, s = shelf, c = card, u = unit
IDC l s c Print the Card ID information for the specified card,
where: l = loop, s = shelf, c = card
Note 1: This command displays the PEC (Product Engineering Code)
and serial number for the card. The IP Line PEC is NTZC80AA.
Table 84
LD 32 – Maintenance commands for the Voice Gateway Media Card (Part 3 of 4)
Command Description