Personal Directory, Callers List, and Redial List Page 277 of 910
IP Line Description, Installation and Maintenance
SCPW to conform to the new length. If the password length has been reduced,
then the leading digits are removed during the sysload.
Password administration
The Station Control Password (SCPW) controls access to the user’s private
Personal Directory, Callers List, and Redial List information.
When the IP Phone first registers to the system after it has been created, by
default the password protection is turned off. If a default password has been
defined for the user, then the user can enable or disable password protection
and change the password. The changed password is updated on the Call
Server and can be viewed in LD 20. Other applications that use this password,
such as Virtual Office and Remote Call Forward, are affected by the password
change.
Initial password
When an IP Phone first registers with the system, by default the password
protection is turned off. SCPW must be initially configured for each user. If
no SCPW has been defined, password protection for the IP Phone cannot be
enabled. The prompt DFLT_SCPW in LD 15 specifies that a default SCPW
is assigned to an IP Phone user when an IP Phone is added or changed in
LD 11. See Table 53.
Table 53
LD 15 – Enable a default SCPW. (Part 1 of 2)
Prompt Response Description
REQ: CHG Change existing data.
TYPE: FFC Change Flexible Feature Code parameters.
CUST
0 – 99
0 – 31
Customer number
Range for Large System and CS 1000E system
Range for CS 1000M Small System, Meridian 1 Small
System, CS 1000S system, Media Gateway 1000B, and
Media Gateway 1000T