Page 342 of 910 Installation and initial configuration of an IP Telephony node
553-3001-365 Standard 4.00 August 2005

Configure physical TNs (LD 14)

Use LD 14 to define the physical TNs for the Voice Gateway Media Card.

Also use LD 14 to disable the cards. The OTM IP Telephony Gateway - IP

Line application requires Voice Gateway Media Cards to be in a disabled

state before transmitting card properties.

See Table 65 for a list of the prompts and responses in LD 14.

Table 65
Configure physical TNs in LD 14
Prompt Response Description
REQ NEW
CHG
OUT
Create the Voice Gateway channels on a line card.
Change configuration data for a Voice Gateway channel.
Delete the Voice Gateway channels on a line card.
TYPE VGW Voice Gateway
TN
l s c u
c u
TN of the first ITG Physical TN
Format for Large System and CS 1000E system, where l = loop,
s = shelf, c = card, u = unit.
Format for Small System, CS 1000S system, Media Gateway
1000B, and Media Gateway 1000T, where c = card and u = unit.
DES aa.......a Description for gateway channel.
Identify the channel using the card’s TLAN network interface
IP address or MAC address.
XTRK aaa ITG8 – ITG 486 8-port card
ITGP – ITG-P 24-port card
MC8 – Media Card 8-port card
MC32 – Media Card 32-port card
ZONE 0 – 255 Zone number to which this ITG Physical TN belongs.
Verify that the zone exists in LD 117.
CUST xx Customer number as defined in LD 15