Page 650 of 910 IP Line administration using OTM 2.2
553-3001-365 Standard 4.00 August 2005

Back up and restore OTM data

The OTM Backup Wizard is used to backup and restore any or all OTM
PC-based data, including IP Line OTM data. All IP Line data is stored in an
Access database file on the OTM PC or Server. This file is backed up only
when the “Full OTM Backup” option is selected. This option backs up all
OTM data contained in the PC directory where OTM is installed and can only
be used to restore all data.
For more information on using the OTM Backup Wizard, see the Common
Services section in Optivity Telephony Manager: System Administration
(553-3001-330).

Update IP Telephony node properties using OTM

To update the node properties of a Voice Gateway Media Card, follow the
steps in Procedure 92.
Procedure 92
Updating the IP Telephony node properties
1In the OTM Navigator window, click the Services folder. Double-click the
IP Telephony icon. The IP Telephony window opens.
2Double-click on the node in the upper part of the window. The Node
Properties window appears.
Perform all required updates to the General tab and Configuration tab
parameters. The General and Configuration tabs are used to set the node
properties. The other tabs affect the CONFIG.INI file and are also known
as the card-affecting properties tabs. If any node or card property is
changed, the configuration data must be transmitted to the node or the
card.
CAUTION
This procedure is not supported for a node that resides
on a CS 1000 system.