Features Page 215 of 910
IP Line Description, Installation and Maintenance

Table 37 describes these commands.

Table 37
LD 117 commands to count registered IP Phones (Part 1 of 4)
Command Description
ECNT CARD L S C
<customer>
Counts and prints the number of IP Phones registered for the specified
card.
• If the <customer> parameter is specified, the count is specific to that
customer. A card must be specified to enter a customer; otherwise,
the count is across all customers.
• If no parameters are entered, the count is printed for all zones. A
partial TN can be entered for the card (L or L S) which then prints the
count per that parameter. A customer cannot be specified in this
case.
Example:
ECNT CARD 81
<< Card 81 >>
Number of Registered Ethersets: 5
Number of Unregistered Ethersets: 27
ECNT ZONE
zoneNum
<customer>
Counts and prints the number of IP Phones registered for the specified
zone.
• If <customer> parameter is specified, the count is specific to that
customer. A zone must be specified to enter a customer; otherwise,
the count is across all customers.
• If no parameters are entered, the count is printed for all zones.
Example:
ECNT ZONE 0 0
<< Zone 0 Customer 0 >>
Number of Registered Ethersets: 4
Number of Unregistered Ethersets: 17