Voice Gateway Media Card maintenance Page 751 of 910
IP Line Description, Installation and Maintenance
tpsAROutput
<Output_Destination>
<“File Pathname”>
Sets the output for all tpsAR protocol traces.
Where:
• Output_Destination specifies where all the trace
messages for the tpsARTraceSet are to be
directed.
If the command is run from the Voice Gateway
Media Card or the vxshell prompt:
The values are:
1 = TTY
2 = RPTLOG
3 = File
4 =TTY + File
If the command is run from the OAM prompt or
PDT prompt on the Signaling Server:
The values are the actual word, not a number:
TTY
RPTLOG
FILE
TTY+FILE
• “File Pathname” is a string encapsulated in
quotes. It specifies the file to output to if option 3
or 4 was selected.
X
tpsARTraceSettings Displays the trace tool settings, which endpoints
are being traced, and where the trace output is
being directed.
X
Table 104
Protocol trace tool CLI commands for the NCS (Part 2 of 3)
CLI Command Description
Signaling
Server